Skip to main content Skip to search Skip to main navigation

Industry

conveyor belt cleaner, scraper blade, blue plastic, industrial equipment, belt maintenance

Conveyor Belt Repair: Here's How to Do It Quickly and Cost-Effectively!

Conveyor belts tirelessly transport materials from A to B. In the process, raw materials such as stones, sand, coal, and the like are moved along the conveyor belt with jolting and rattling motions. Even the sturdiest conveyor belt cannot withstand this constant strain without showing signs of wear. The inevitable impacts, oscillations, and vibrations literally put the rubber of the conveyor belts to the test.

After some time in operation, wear and tear becomes apparent in the form of holes or tears in the conveyor belt. Now it’s time for a quick conveyor belt repair!

Acting quickly is the be-all and end-all

Regular maintenance is important for detecting damage to the conveyor belt early on and preventing production bottlenecks. After all, the longer the belt – and thus production – is at a standstill, the greater the financial loss will ultimately be for the conveyor system operator. Once a conveyor belt tear has occurred, immediate action must be taken and the conveyor system shut down so that the necessary conveyor belt repair can be carried out.

What now?

A conveyor belt repair can quickly become very time-consuming and expensive. If you hire a repair service, you almost always have to expect long downtimes and high costs. Often, it is not possible to simply remove the section around the damaged area; instead, entire connecting parts in the conveyor belt must be replaced. In addition, conveyor belts are often custom-made, and remanufacturing them costs even more time and money.

Conveyor belt repair –
can I do it myself?

We’ve developed a DIY conveyor belt repair kit that minimizes downtime and restores the conveyor belt’s functionality at a low cost. Sounds too good to be true? But it’s actually true!

Advantages


  • Fast curing speed
  • High elasticity
  • Wear resistance
  • Impact- and abrasion-resistant
  • High tear resistance
  • High mechanical strength
  • Temperature resistance from -60°C to +100 °C
  • Quick application without tools

  • Belt Repair-Kit | polyurea repair and coating compound for rubber surfaces, work pack
    Belt Repair-Kit
    polyurea repair and coating compound for rubber surfaces, work pack
    $366.83* (excl. VAT)

    ($621.75* / 1 kg)

    Average rating of 5 out of 5 stars

    Details

    Step-by-Step Guide to Repairing a Conveyor Belt
    Here's what you'll need to repair the conveyor belt:


  • Angle grinder (with a rasp or wire brush disc)
  • Belt Repair Kit 550 (work package) or 590
  • (double cartridge) Dispensing gun (recommended for 590)
  • Belt Repair Kit 550 for repairing wide transverse cracks

    1. Remove heavy dirt. 
    2. Sand and level the edges of the crack with an angle grinder.
    3. Clean the surface with WEICON Spray Cleaner S.
    4. Mix WEICON Primer G and shake for more than 2 minutes.
    5. Apply WEICON Primer G to the damaged area with a brush.
    6. Allow the area treated with WEICON Primer G to air dry for a while.
    7. Mix WEICON Urethane 85: Pour the resin completely into the hardener.
    8. Mix the resin and hardener thoroughly.
    9. Work a generous amount of the WEICON Urethane 85 mixture into the crack.
    10. Smooth the surface with the WEICON Flexy contour putty knife.

    Go to product   

    Belt Repair Kit 550 for repairing wide transverse cracks

    1. Remove heavy dirt. 
    2. Sand and level the edges of the crack with an angle grinder.
    3. Clean the surface with WEICON Spray Cleaner S.
    4. Mix WEICON Primer G and shake for more than 2 minutes.
    5. Apply WEICON Primer G to the damaged area with a brush.
    6. Allow the area treated with WEICON Primer G to air dry for a while.
    7. Mix WEICON Urethane 85: Pour the resin completely into the hardener.
    8. Mix the resin and hardener thoroughly.
    9. Work a generous amount of the WEICON Urethane 85 mixture into the crack.
    10. Smooth the surface with the WEICON Flexy contour putty knife.

    Go to product 

    Quick Return to Service

    Shortly after repairs using the WEICON Belt Repair Kit, the conveyor belt can once again be subjected to mechanical stress (after 6–8 hours). Production can continue! Full final hardness is achieved after 24 hours.

    The step-by-step repair of a conveyor belt at a quartz factory clearly demonstrates how our Belt Repair Kit works. Feel free to check out our video on this topic!

    Comment area
    Write a comment
    Your comment will be released after review.
    Weitere Beiträge
    • Railway wheelset, Steel train wheels, Industrial machinery, FAG bearings, Rusty metal
      Installation of an emergency safety catch on a suspension railway
      For more than a century, suspension railways have been among the most fascinating transport systems in the world. The Wuppertal suspension monorail – perhaps the most iconic of its kind – has been in operation since 1901. And continues to represent engineering innovation and future-oriented urban mobility. Suspension railways differ from traditional trains by travelling suspended from an elevated track. Usually through cities or densely populated urban areas. This unique design offers numerous advantages: it takes up no road space, runs quietly and efficiently, and avoids the delays of street-level traffic. Today, suspension railways are used worldwide. In various forms, as part of public transport systems, airport shuttles or within industrial facilities. Suspension railway systems not only require the highest precision in construction, but also in maintenance and servicing. Repairs often need to be carried out quickly, safely and with lasting precision during operation. This is illustrated in the following example: Installation of an emergency safety catch on a suspension railway.
      Mehr lesen
    • industrial pipes, gray PVC, flanged joints, pipe elbows, handwheel valves
      Sealing sewage pipes: a quick and low-cost solution!
      Sewage or drainage pipes are part of large drainage or sewage treatment plants. They are built into buildings or run underground. Although they are generally constructed to last a long time, they are subject to wear, tear and ageing due to continuous use. If there are holes in a drainage pipe or any other damages, rapid action is required. We show you how to sealing sewage pipes – quickly and at low cost!
      Mehr lesen